Two-Piece Chair Back Width
In order to obtain the width of an outdoor patio chair frame, a measurement must be taken from center rail to center rail of the chair frame. Imagine a center line that runs the length of the slot in the chair rails. This is the center point of the rail. Take a measurement from one center point to the opposite center point of the chair top sling rails.
When measuring the frame for width, two measurements should be taken. Net Patio Furniture has found it best to measure in areas where the bolts and spreader bars are attached. Measure at least five inches down from the top of the outdoor patio chair top and few inches up from the bottom when measuring for width. Please do not provide measurements taken from the very top of the chair rails as they tend to naturally flair out overtime. Always measure at least five inches down from the top of the chair frame.
Take the average of the two measurements and round to the nearest eighth of an inch and this will be the width of the chair top.
Two-Piece Chair Back Length
To arrive at the length, measure the length of the patio chair top sling rail from top to bottom using a cloth measuring tape. Take a measurement from the very edge of the chair top rail down to the bottom edge.
Be sure that the measuring tape rests flat along with the chair back and does not move out of position while measuring.
Two-Piece Chair Seat Width
The measurements for the two-piece chair bottom will be taken exactly as the top measurements were taken. Take two measurements for width. For best results, take the measurements where the bolts attach on the chair seat. Take one measurement at the back of the patio chair seat and another near the front.
Two-Piece Chair Seat Length
Measure the length for the chair seat just as you did for the chair back. In most cases, it is best to measure where the existing sling is currently installed.
MEASURETWOPIECESLING
Comments are closed.